|
|
|
Products: Test
Equipment
SG1000A Signal Generator
(310-010080-001)
| Specifications |
| Frequency Band |
Tuning Range |
Step Size |
Maximum Power Out |
Attenuation Range |
| 1 kHz |
.95 to 1.05 kHz (+/-5%) |
1 Hz |
40 dBm |
0 to 90 dB |
| 10 kHz |
9.5 to 10.5 kHz (+/-5%) |
10 Hz |
40 dBm |
0 to 90 dB |
| 100 kHz |
95 to 105 kHz (+/-5%) |
100 Hz |
40 dBm |
0 to 110 dB |
| 1 MHz |
.95 to 1.05 MHz (+/-5%) |
1 Hz |
40 dBm |
0 to 110 dB |
| 10 MHz |
9.5 to 10.5 MHz (+/-5%) |
10 Hz |
40 dBm |
0 to 110 dB |
| 100 MHz |
95 to 105 MHz (+/-5%) |
100 Hz |
30 dBm |
0 to 110 dB |
| 400 MHz |
380 to 420 MHz (+/-5%) |
100 Hz |
30 dBm |
0 to 110 dB |
| 1 GHz |
.95 to 1.05 GHz (+/-5%) |
1 Hz |
30 dBm |
0 to 110 dB |
| 10 GHz |
9.8 to 10.2 GHz (+/-2%) |
1 Hz |
30 dBm |
0 to 110 dB |
|
| Attenuator Accuracy |
+/- 1.2
dB |
| Harmonic Spurious |
< - 20 dB |
| Non-Harmonic Spurious |
< - 40 dBc |
| Phase Noise |
-90 dBc/Hz at 10kHz
offset (1 GHz band) typical
-115 dBc/Hz at 500 kHz (1GHz band) typical |
| Front Panel Fault Display |
Over-temperature,
synthesizer unlock |
| Power Amplifier Disable |
Front panel illuminated
switch |
| External Signal Input |
Front panel input,
switch-enabled frequency range select (0 dBm nominal input level) |
| Operating Temperature |
0 to + 40 degrees
Centigrade |
| Operating Humidity |
95%
relative humidity, non-condensing |
| Power Supply |
110/220
VAC (auto-adjusting), 48–63 Hz, 230 watts |
| Size |
19” x 5.25” x
20” (Width x Height x Depth) |
| Weight |
33 pounds nominal |
PR1000A Preamplifier
(310-010083-001)
| Specifications |
| Frequency |
1 kHz to 1 GHz (low frequency input)
9.8 to 10.2 GHz (high frequency input) |
| Gain |
Low frequency input – 38
dB minimum
High frequency input – 45 dB minimum
(including
external 10 GHz amplifier) |
| Noise Figure |
3.5 dB maximum (1 kHz to 500 MHz)
4.5 dB maximum (500 MHz to 1 GHz)
4.5 dB maximum (9.8 to 10.2 GHz)
(including remote preamp and 10 dB of cable loss between remote pre-amplifier
and PR1000A) |
| Output Level |
+ 8 dBm minimum at 1 dB gain compression (output
to spectrum analyzer) |
| VSWR |
2.0:1 maximum all ports |
| Maximum Safe Input Level |
Low frequency input: +20dBm
High frequency input: +20dBm |
| Internal Bias Tee |
Provides +12 VDC via high
frequency input
Connector to the remote 10 GHz pre-amplifier
(0.5 Ampere fast blow fuse) |
| Operating Temperature |
0 to +40 degrees Centigrade |
| Operating Humidity |
95% relative humidity, non-condensing |
| Power Supply |
110/220 VAC (auto-adjusting), 48–63
Hz, 15 watts
(1.0 Ampere fast blow fuse) |
| Size |
19” x 1.75” x 10” (Width
x Height x Depth) |
| Weight |
6 pounds nominal |
Return to SG1000A/PR1000A page
|
|
|
