Products: Signal Sources

Local Oscillator Synthesizer
(310-010058-001)

• Low phase noise

• Low spurious (-60 dBc max)

• Computer Controlled (RS-232C)

• Single or dual output

• Many available bands: SMR,AMPS,GSM,DCS,PCS,WLAN

• -10°C to 60°C operating range

• Shielded design

• Internal frequency reference
  
  

This programmable signal source is completely self-contained with an internal TCXO reference. The synthesizer can be either serially loaded through the RS-232C control port or set up to power on at a pre-determined frequency. The primary output can be configured for output frequencies up to 2.5GHz, while the secondary output can be configured for frequencies up to 510 MHz. The step size can also be specified. Narrow step sizes will effect the phase noise and spurious output of the synthesizer. This source is suitable for use in dedicated test setups or as a component of a production system. Typical applications include:

• Local oscillator (LO) source for single or dual conversion up/down converters
• Stimulus for CW transmitter
• Signal generator for bench testing or production test setup.

A datasheet is available for this product as a PDF (Portable Document Format) file. If you have questions about using PDFs, please visit our PDF Help page.